Powered Inserting Powered rollers insert pre-cut UniCoil plastic spiral elements into pre-punched documents. Dual Cut/Crimp Heads Integrated handle manually cuts & crimps both ends at once for a simple, consistent finish. Versatile Inserts all pitch UniCoil elements from 6mm to 30mm, for books from 1/16" to 1" thick, by simply adjusting the roller position. Cut/Crimp Capacity Cuts/Crimps all pitch UniCoil elements from 8mm to 30mm. Efficient Production speeds of 150-250 books/hour on average, depending on the operator. Easy to Use Combines UniCoil insertion and crimping into a single, efficient tabletop unit. Simple setup and operation. No special training or personnel required. Convenient Built-in accessory and off-cut trays. Wide Range of Document Sizes Accommodates all document finishing edges from 5.5" to 12". Simple Installation Small-footprint tabletop unit allows easy machine placement wherever it's needed. Standard Power Plugs directly into standard power outlet. Rocker switch activated.

 

Complete tabletop UniCoil plastic spiral document finisher for pre-punched documents. Dual rollers insert UniCoil plastic spiral elements from 6mm to 30mm in diameter (1/8" to 1-1/16"). Includes integrated dual-headed cutting and crimping unit to cut & crimp UniCoil plastic spiral elements from 8mm to 30mm (3/16" to 1-1/16"). Will insert on a binding edge up to 17", and cut & crimp from 5-1/2" to 12" on the binding edge. Accommodates all UniCoil plastic spiral pitch sizes. Powered UniCoil Insertion with Integrated Cutting & Crimping The CB500 Tabletop UniCoil Plastic Spiral Inserter is a tough, compact production tool that combines powered insertion rollers with an integrated handle to manually cut and crimp both ends of the plastic spiral at once for a simple, consistent finish. The versatile CB500 is designed to work with any pitch of pre-cut plastic spiral elements and can accommodate a full range of UniCoil sizes for pre-punched documents from 1/16" to 1" thick by simply adjusting the roller position. Typical Productivity Averages 150-250 books/hour As a stand-alone unit, average production speeds of 150-250 books/hour can be achieved, depending on the operator and materials. Even higher production rates are possible by combining the CB500 inserting capabilities with the PC2000 UniCoil Two-Sided Automatic Crimper as a companion unit for higher-volume plastic spiral finishing environments.

S p e c i f i c a t i o n s

Book Specifications 5.5" to 12", up to 1" thick Book Production 150 - 250 books/hour Dimensions (HxWxD) 11" x 19" x 15" Voltage 110/220V 60/50 Hz Weight (Shipping) 55 lbs. (58 lbs.)