 |
(800) 398-5283
|
| |
CMT-330 Three-Knife
Trimmer
|
|
|
|
|
|
- Graphic LCD user interface
- Eight-station cooling tower for in-line systems allows ample
set-up time before books are trimmed
- Serial communication port permits remote setup and control for
fully-automated bookshop environments
- For added safety while changing blades, a custom-designed edge
guard shields the knife. Blades are easily accessible for fast,
efficient changes
- Infrared sensors monitor each waste bin and generate a display
on the control panel when a bin is full
|
 |
Included: cut stick, cut stick puller, knife lifter, three waste
bins, three knives, two cut plates, eighteen knife bolts, & t-handle
hex wrench
The CMT 330 is a three-side trimmer designed for the
on-demand printing environment. It features full digital control
of the trimming process - servomotors control all adjustments normally
done by hand with a traditional trimmer. Just key in the starting
size and the finish size, and the trimmer takes it from there.
The control panel features a graphic LCD display of
the job being trimmed. For repeat jobs, the CMT 330 can store
99 book trimming jobs in its memory. It can be used in line with
perfect binders, or used off-line in a manual feed mode.
|
S p e c i f i c a
t i o n s
|
| Minimum Book
Size |
4" x 6" |
| Maximum Book
Size |
9.5" x
12.5" |
| Maximum Book
Thickness |
2" |
| Minimum Trim |
0.125" |
| Maximum Face
Trim |
5.5" |
| Speed |
400+ Books Per
Hour |
| Memory |
99 Book Jobs |
| Set-up Time
for Book Size Change |
15 Seconds |
| Overall Height |
61" |
| Overall Width |
34.5" |
| Overall Length |
84" |
| Net Weight (approximate) |
2500 lbs. |
| Shipping Weight
(approximate) |
2800 lbs. |
| Electrical |
3 Phase, 208/230
V, 25 A
U.L. Listed |
| Air Supply Requirements:
|
80 - 90 PSI,
5 CFM Unlubricated |
|
|
 |
| |
|
|
|
|
|
 |
|
 |
| 
Challenge Cutters
|
|
|
|
|
More Info
|
Print & Finishing Solutions
1632 Sierra Madre Circle
Placentia, CA 92870 USA
|
